Search results

Well I ordered a new backing plate. I am wondering if I can take that bolt off pull out the stem/threads and then install the new backing plate. I have had this unit over 10 years! I forget the set up. Help/ suggestions, Thanks Nick

I figured as much, thanks Mike!!!!!

Yes very sensitive area will probably hand sand?

Mike, the sanding discs can I use a rotory or do I need a specific polisher. I Have D.A.s Thanks Nick

Any reviews on this tool???

Almost finished, I need to sand /polish out the new paint line , suggestions? 1500-2000 then polish out???? I will need to patch with some bumper resin To fill the scratch . Spot putty did not adhere. We are getting closer!!! After this is cured I will clear coat w/2k and use a blender.

Well Mike ! You were correct, the paint came out yesterday while I was wiping the area down before putting the clear down. I patched this this with spot putty. I will start sanding today, probably with 1000? I was ticked yesterday! My plan is to go to the auto supply shop and get a can of paint...

Not perfect but from 2-3 feet hard to see the imperfection. I used the rotary at 1000 -1400 rpm. No new paint peel.:-)

Got her polished out! Will wait to do clear coat tomorrow!

Thank you for you for responding and help! I need to sand again later today as the were a few small valleys in the damaged area. thank you for your guidance Mike very much appreciated!!!!!!! I will sand the area again prior to clear coat then , I will buff the clear lightly again! Nick P.s...

I spent an hour sanding today. So far I have put 6 layers of paint on this scratch . I am getting close to finishing the project! I am wondering if I need to use a wool pad to start buffing out the area? I will wait for the paint to cure. The light area is sanding marks from 2000 grit sand...

Stopped waiting for paint and spot filler to cure 95 degrees this afternoon so that should help with curing!

Had to use a bit of spot putty scratch was deep! Now I sit and wait!!!

So far so good!!! I am just letting the sand paper do its thing!

Oh it's been hot here ! 90-100 in the afternoons and I did put the car out in the sun earlier in the week!😀

I am starting to sand today I have to assume wet sanding would be best in this situation! I let the paint cure for 48 hours. Nick